Leica IPAS Freebird, the new generation of Leica Geosystems leading IPAS GNSS-IMU processing software, sets new standards in efficient data acquisition and accurate image georeferencing.
Economize your data acquisition by allowing tighter turns Leica IPAS Freebird no longer requires a continuous lock of satellites. Leica IPAS Freebird frees up your mission planning because it allows much tighter turns between flight lines. The results are up to 25% improvement in flight economy for sensor missions and several minutes of time savings per turn.
Simplified GNSS-IMU processing in one step
Leica IPAS Freebird offers the easiest way to achieve accurate image georeferencing by using GNSS raw meas-urements and tightly coupled GNSS-IMU processing in one step. Previously, GNSS-IMU processing for accurate image georeferencing required two steps: In a first step, GNSS trajectory was processed using GrafNav/GrafNet software. This required a continuous lock of 5 or more satellites. In a second step, IPAS Pro blended the trajec-tory with the IMU data.
Now, the all new Leica IPAS Freebird with IPAS TC allows you to combine those steps into one by using GNSS raw measurements and tightly coupled GNSS-IMU processing.
Leica IPAS Freebird not only saves you time, it really saves you money. And best of all: it comes standard with all Leica Geosystems imaging and LIDAR sensor systems.
Performance Indicators:
Up to 25% improvement in flight economy for sensor missions
Allows sharper turns between the flight lines – does not require continuous lock of satellites
Saves several minutes of time per turn
Does not require the separate step of GNSS trajectory processing
GNSS-IMU post processing is simplified and faster
Precise Point Positioning – solutions without GNSS base station data
Standard with all new Leica Geosystems imaging and LIDAR platforms
Flight without Leica IPAS Freebird
Flight with Leica IPAS Freebird
Leica IPAS CO+ Camera Orientation Software Features:
Transformation of Leica IPAS TC solution, camera events and photo ID's for further processing in various photogrammetric software programs
Computation of misalignment angles
Transformation of points among various coordinate systems
Leica IPAS CO+ option provides the built in functionality for misalignment calculation with Automated Point Matching and Aerial Triangulation
Ønsker du mere information?
Ønsker du mere information om dette produkt?
Vælg hvad du søger efter, vælg land, klik derefter på [Fortsæt] for at finde din nærmeste Leica Geosystems kontakt:
